Free · ~90 Seconds · No email required
Your roof, priced in seconds.
Enter your address. Get a satellite-measured estimate. No email, no phone, no sales call — just your number.
- ~90s
- Quote time
- ±2%
- Accuracy
- ★ 4.9
- 127 reviews
- 30+
- Years calibrating
Powered by satellite imagery
Your quote, in three steps.
Enter your address. The tool pulls high-resolution satellite imagery, measures every facet of your roof, applies Central Valley material and labor costs, and delivers a price range you can plan around.
Estimate based on satellite roof measurements plus typical material and labor costs for California's Central Valley. Final flat-rate pricing is confirmed after a free in-person inspection.
A note from Mario
How accurate is an instant roof quote?
Very accurate for the things satellites can see — blind to the things they can't.
The Roofle engine pulls high-resolution GIS imagery, runs photogrammetric analysis to measure roof area, slope, and facet count, then applies our Central Valley pricing model. calibrated against 30+ years of actual jobs we've installed across Stanislaus, Merced, San Joaquin, and surrounding counties.
For a straightforward gable or hip roof, satellite measurement comes within ±2% of what we'd measure with a tape on the deck. The price band accounts for normal variation in tear-off complexity, ridge venting, and underlayment choice.
Where it gets less precise: complex roofs with many dormers, deep valleys, or unusual angles can vary ±10–15% from the in-person quote. facet seams add labor and waste cuts that aerial imagery underestimates. We always confirm the flat-rate price during the free on-site inspection.
If you’ve ever been quoted by phone or by a contractor who didn’t measure, the instant tool is dramatically more accurate. If you’ve been quoted by an expert GAF or OC-certified installer who walked your roof, expect the in-person number to land within the satellite price band. Same math, just verified.
Set expectations
What the estimator sees
(and what it can't).
Honest transparency about what satellite measurement captures versus what only a person on the roof can verify.
- Total roof area (square footage)
- Pitch and slope on every facet
- Number of distinct roof planes
- Skylights, chimneys, major penetrations
- Roof complexity score
- Material category typical for the property
- Decking condition (rot, soft spots)
- Underlayment integrity
- Attic ventilation gaps
- California Title 24 code upgrades
- Wood damage hidden under shingles
- Drip edge & fascia damage
Pricing transparency
How material
changes your price.
2026 installed-cost ranges for California's Central Valley. Includes tear-off, underlayment, flashing, ventilation, and labor. Updated monthly
Architectural shingles for budget-conscious re-roofs and rentals.
Residential roofing →The sweet spot for most California homeowners. GAF Timberline HDZ or OC Duration.
Residential roofing →Excellent Central Valley heat resistance. HOA-friendly profile.
Tile roofing →Mediterranean and Spanish style homes. Eagle Capistrano profile.
Tile roofing →New builds and fire-zone properties. PAC-CLAD panels.
Metal roofing →Commercial buildings and residential additions. Carlisle SynTec.
Flat roofing →Want the full material breakdown? Read the Central Valley materials guide →
What customers usually choose
Material distribution.
Across 500+ residential re-roofs we've completed in California's Central Valley, here's what homeowners actually pick. Use this to sanity-check your own choice.
Distribution across residential re-roofs completed 2024-2026. Commercial flat-roof projects (TPO/EPDM) tracked separately. Asphalt 50-yr leads because the price-performance ratio is the best in our climate — but it's not always the right answer for every home.
A fair question
Why use this tool
instead of Roofle.com directly?
Roofle is the engine — same satellite, same measurement. But the price you see here is calibrated by what we actually charge in your specific city.
Through Econo Roofing (this tool)
- Pricing calibrated to actual Central Valley jobs we've completed (30+ years of data)
- Direct path to free in-person inspection if you like the price
- Mario reviews any complex quote personally before final pricing
- GAF Master Elite + OC Platinum + CertainTeed warranty options included
- Same Roofle satellite engine — same accuracy
Roofle.com directly
- Same satellite engine, same accuracy
- Generic national pricing — not calibrated to Central Valley labor or supply costs
- You'll be matched with whatever contractor pays them most for the lead
- No transparency on warranty tier the matched contractor offers
- Email/phone required — no anonymous price preview
If you'd rather use Roofle directly, do it. The reason this page exists is that local calibration matters. we wanted to be transparent about what we're charging. not because we're pretending to be a unique tool.
Next steps
What happens after
your instant quote.
Four steps. No high-pressure sales. You decide the pace.
We confirm your interest.
If you opt in for follow-up at the end of the quote, we reach out within one business day. No interest? You'll never hear from us — we don't run drip campaigns.
Free on-site inspection.
A certified inspector walks your roof, checks decking and ventilation, photographs every leak, and measures details satellites can't see. Usually 45–60 minutes.
Written flat-rate quote.
You receive a detailed line-item estimate with a single flat-rate total. Includes warranty tier (GAF Master Elite, OC Platinum, or CertainTeed), material specs, and timeline.
You decide.
No-pressure decision window. If you want to schedule, most jobs start within 1–3 weeks. Financing is presented if you want it. If you pass, we wish you well — that's it.
Real prices · real jobs
Sample Central Valley
re-roof quotes.
Anonymized examples from new Econo Roofing jobs. Your number depends on roof size, complexity, and material — but these illustrate what real flat-rate quotes look like.
2,200 sq ft
Concrete tile, complete tear-off, new underlayment, ridge vent upgrade, OC Platinum warranty.
1,800 sq ft
GAF Timberline HDZ, full tear-off, attic ventilation upgrade, GAF Golden Pledge warranty.
3,000 sq ft
60-mil Carlisle SynTec TPO, recover over existing modified bitumen, new drains and parapet flashing.
Use both
Two paths to your number.
The instant quote and the in-person inspection serve unique needs. Most homeowners use both.
Use the instant quote when:
- You're early in research and want a real number to compare
- You're shopping multiple materials and want the cost spread
- You want to plan a budget without an appointment
- You're an investor or landlord pricing a portfolio
- It's after-hours or weekend — the tool runs 24/7
Use the free inspection when:
- You're ready to schedule and want a flat-rate written quote
- You suspect hidden damage (leaks, sagging, staining)
- You filed an insurance claim and need documentation
- You have a complex roof we should walk before quoting
- You want to verify warranty tier eligibility face-to-face
Ready for the next step?
Schedule a free in-person inspection.
Written report, flat-rate pricing, zero obligation. Most homeowners hear back within one business day.
Frequently asked
Common questions
about instant quotes.
How accurate is an instant roof quote?
Satellite-measured roof area and pitch are accurate to within ±2% on simple-to-moderate roofs. Our Central Valley pricing model is calibrated against 30+ years of local job data. Complex roofs with many dormers, deep valleys, or unusual angles can vary ±10–15% from the in-person quote. We confirm flat-rate pricing during the free on-site inspection.
How long does an instant roof quote take?
Most homeowners complete the address entry and material selection in 60–90 seconds. The estimate is delivered right away on the same screen — no waiting, no follow-up email, no sales call needed.
Does the instant quote replace an in-person estimate?
No. The instant quote gives you a reliable price range to budget and compare options. But a free in-person inspection is needed before any work begins. The inspection verifies decking condition, ventilation, code-compliance items, and any hidden damage that satellite imagery cannot detect.
What does the satellite estimator measure?
It measures total roof area, pitch (slope), the number of distinct roof facets, and basic complexity of penetrations like skylights and chimneys. It does not see decking damage, underlayment condition, ventilation gaps, code upgrades like California Title 24 cool-roof rules, or wood damage under existing shingles.
Is there any obligation after getting a quote?
None. The instant quote is free, needs no email or phone number to view your price, and there is no follow-up sales pressure. If you want to move forward, you can schedule a free inspection directly from the result screen.
How long is my instant quote valid?
Material costs shift with maker pricing — usually every 60–90 days. We honor the instant quote price band for 30 days from generation, with the final flat-rate price confirmed at inspection.
What if my address isn’t recognized?
Rural or recently-built addresses sometimes aren’t yet in the satellite imagery database. If you see this, call us at (209) 668-6222. we can manually pull GIS data or schedule a same-week in-person measurement at no cost.
Do you offer financing on roofs quoted through this tool?
Yes. We partner with GreenSky and ServiceFinance to offer 0% promo financing for qualified buyers, plus extended 60–120 month plans. Financing options are presented at the in-person quote so you can see the actual monthly payment before you decide.
What areas does the instant quote serve?
All of California’s Central Valley plus the Bay Area edge: Stanislaus, Merced, San Joaquin, Tuolumne, Calaveras, Alameda, Contra Costa, Sacramento, Solano, and Fresno counties. Including Modesto, Turlock, Stockton, Tracy, Manteca, Lodi, Fresno, Sacramento, and 50+ other cities.